Gray Flat Moly Resin Refinishing (slide only)
One week turnaround. A match to older gray military parkerizing including some very early Colt and Armalite M-16 rifles. Moly resin finishes are specifically formulated from a phenolic resin base and molybdenum disulfide (a superior lubricant) with an exclusive blend of additives. Our additives create a phenolic coating that is hard, durable, and extremely chemical and heat resistant. Our special low temperature catalyst will cause the Resin to harden and bond to the surface to form a barrier to acids, oils, paint removers, powder solvents, bore cleaners and other strong industrial solvents. The low curing temperature prevents possible heat damage to parts during the curing process. We select our phenolic base stocks from hundreds offered by Dow Corning and 3M. The combination of the most suitable base stock, our additives, and molybdenum creates a truly unique coating that represents state-of-the-art technology. No other thermally cured firearm finish available on the market today has the same characteristics and properties that Moly Resin� offers. Moly Resin� is a coating developed for ordnance usage on equipment and weapons, providing excellent corrosion protection, abrasion resistance and lubricity to meet automatic weapon dry firing requirements after 60 days seawater immersion. A note about the difference between a typical paint and coatings like Moly Resin. A typical paint is a formulation of pigments and other ingredients diluted with a solvent. When the solvent evaporates, the pigments harden and that hard residue is what is referred to as paint. Unfortunately, paint is susceptible and damaged easily and removed by many, if not most chemical solvents, acids, gun cleaners, bore cleaners, etc. A coating like Moly Resin thermally cured are actually a complex mix of phenolics, polymers, etc. that are highly reactive to each other but kept from reacting by a catalyst mixed into the coating formula. The catalyst is activated by heat at a certain temperature. Once the catalyst is activated, a chemical reaction occurs between the various chemicals to form a totally new substance. The new substance formed becomes very hard and resistant to the original solvents used to dissolve the original phenolics and other base resins, etc. This is why Moly Resin is not considered to be a paint.